Single Station Semi-Auto Soldering Station Automatic Soldering Robot For Electronic Assembly
Introduction
Semi-Auto Soldering Station is a device used for electronic welding, which provides a semi-automatic welding solution.
Function Overview
This is a semi-automatic equipment that integrates multiple welding functions.
It can realize automatic identification of solder joints, automatic tin supply, automatic welding and other functions.
It greatly improves welding efficiency and welding quality, and is suitable for small and medium-sized batches of electronic products welding.
Main features
1. PLC touch-screen all-in-one machine, with timely and reliable response and
anti-interference.Support system continuous update.
2. Soldering time,tin feeding time and volume and other parameters all controlled by the touch
screen.
3, 150W high frequency soldering station.
4. Use customized fixture (jig) to fix the product during the soldering process, different product use
different jig.
5. High stability imported air cylinder.
6, Use positioning metal solder handle.
7, High precision step solder wire feeder
8. Easy operation, operator can learn and use it in fast time.
Working process
Place the circuit board to be welded on the positioning platform.
The machine vision system automatically identifies the position and angle of the solder joint.
The automatic tin supply system supplies an appropriate amount of solder to the solder nozzle.
The welder automatically aligns the solder joint according to the identification results and implements welding.
After welding is completed, it automatically exits and waits for the next solder joint.
Application scenarios
Mainly used in the welding process of electronic product manufacturing, such as PCB assembly, electronic module welding, etc.
Suitable for small and medium-sized batch production, improve welding efficiency, and ensure welding quality.
It is widely used in consumer electronics, industrial control, communication equipment manufacturing and other industries.
Technical details
| Product Name |
Semi-auto soldering station |
| Model No. |
HS-668 |
| Power supply |
Single phase, 220V 50/60Hz |
| Air pressure |
0.2-0.6MPa(Use clean dry air) |
| Control mode |
PLC+touch screen |
| Temperature |
(-10)-(+60℃)No wind, no dust |
| Soldering control switch |
Pedal switch |
| Machine size |
L410*W350*H500MM |
| Weight |
15 KG |
Maintenance
1. The waste produced by the machine in the course of work should be cleaned up in time to avoid
obstruction and cause the machine to run badly.
2. After each shift, first clean the environment, so that the ground dust-free, clean. Clean the
equipment again, including welding platform surface, moving shaft, welding head, etc. No
3. The sliding part of the machine is lubricated once a week to ensure smooth sliding.
4. Machine parts secured.
5. The fixture and fixture holder are cleaned every 4 hours.
6. The soldering tip is maintained every 2 hours. Observe the loss, service life about 20000-35000
points, timely notify the production line technician to replace the soldering tip.At present, all
sold soldering tips may be oxidized or perforated due to tin wire damage is more common.
Please replace the tin wire in time if you can not change the tin material and can not reach the
above service life. Please understand above.
Product Details
PLC touch-screen all-in-one machine
Soldering tips of different sizes can be configured
Product Tags:
|
|
Single Station Semi-Auto Soldering Station Automatic Soldering Robot For Electronic Assembly Images
|
